technical data sheet adaptor rpc-tnc plug C sma jack 06S132-K00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface rpc-tnc according to iec 60169-26 sma according to iec 60169-15; en 122110; mil-std 3 48a/310 sma mechanically compatible with rpc-2.92 and rpc-3 .50 documents n/a material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m , over chemical nickel outer contact stainless steel passivated coupling nut stainless steel passivated dielectric 1 ptfe dielectric 2 ppe
technical data sheet adaptor rpc-tnc plug C sma jack 06S132-K00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 18 ghz return loss 3 19 db, dc to 18 ghz insertion loss 0.1 x db insulation resistance 3 5 g w center contact resistance rpc-tnc 1.5 m w outer contact resistance rpc-tnc 1.0 m w center contact resistance sma 3.0 m w outer contact resistance sma 2.0 m w test voltage 1000 v rms working voltage 480 v rms rf-leakage 3 90 db up to 1 ghz mechanical data mating cycles 3 500 center contact captivation 3 27 n coupling test torque rpc-tnc 1.70 nm recommended torque rpc-tnc 0.46 nm to 0.69 nm coupling test torque sma 1.70 nm recommended torque sma 0.80 nm to 1.10 nm environmental data temperature range -40c to +85c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 rohs compliant tooling n/a suitable cables n/a weight 37.8 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 02.12.04 martin moder 11.02.16 d0 0 16-0128 maik knoll 11.02.16 while the information has been carefully compiled t o the best of our knowledge, noth ing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
